0086-576-84214651

hengyuan@cnhengyuan.com

Cap Compression Machine

WHY IS COMPRESSION THE BEST CHOICE?

Low melting temperature,means energy saving and low cap cost.

No injection point,means better performance.

An effctive control of the production repeatability.

Machine is easier and quicker to manage.

Longer efficiency periods of the machine.

Reduced and easier machine maintenance.

Machine Bottle Cap Forming Principle:

Cap molding machine is for making caps from plastic materials.The heated materials are extruded from extruder,cutted by segregation plate through screw driving and shared to each cavity equably,then molded to be caps by forming system. The machine is controlled by PLC,including frequency control system,hydraulic system,temperature control system and cooling system.The operating system is easy and automatic with man-machine conversation. As same production capacity,its cost is much lower than produced caps from injection machine.It perfects products with this technology,since there is no gate on cap or no waste of hot runner.

Technical Parameter:

型号ModelBCM-18CBCM-24CBCM-32CBCM-48C
产量Production Capacity17000~18000 pcs/h23000~24000 pcs/h31000~32000 pcs/h47000~48000 pcs/h
瓶盖直径Cap Diameter20~42mm20~42mm20~42mm20~42mm
瓶盖高度Cap Height10~30mm10~30mm10~30mm10~30mm
瓶盖材料Cap MaterialPP/PEPP/PEPP/PEPP/PE
模腔数Mold Cavity18243248
电压Power380v/3ph/50Hz380v/3ph/50Hz380v/3ph/50Hz380v/3ph/50Hz
装机功率Installation Power30KW50KW75KW95KW
耗电量Air Consumption0.9m3/hr,0.8Mpa1.4m3/hr,1.0Mpa2.8m3/hr,1.0Mpa3.6m3/hr,1.0Mpa
机器尺寸Machine Dimension2660*1200*2000mm3800*1550*2100mm5500*3600*2100mm6000*3600*2150mm
机器重量Machine Weight2.1T3.0T4.8T5.8T


Tel: +86-576-84214651 Fax: +86-576-84214663 Email: hengyuan@cnhengyuan.com

Add: No.58 Kangzhuang rd,Economic Zone,Huangyan,Taizhou,Zhejiang,china.

Copyright © 2018. Taizhou Huangyan Daelong Mold Co.,Ltd All Rights Reserved.